# How to put a video QR code on a business card or slide

Make a QR code for a video business card or event slide, write a greeting that travels, and test the printed code and readable address on a phone.

By Pranav Reddy, founder of hi.video. Published 2026-11-08, updated 2026-11-08. Canonical page: https://hi.video/blog/qr-code-for-video-business-card

## Short answer

Publish a video introduction, copy its recipient link into a static QR code generator, and place the code beside a readable web address. Give people a reason to scan. Try the actual printed card at arm's length and the projected slide from a back seat before you order cards or present.

A print shop can reproduce the wrong QR code beautifully. Before you think about card stock, decide what someone should see when they pull their phone out. A person who finds your card in their coat a month later should still recognize you. Someone looking up at your last slide needs a reason to reach for the phone in the first place.

## Record a greeting that can leave the room

Suppose you design signs for small museums and have just given a talk on relabeling a crowded entrance. Your slide can say, "Meet the person behind the entrance map." Your card can say, "A quick hello from the person who draws the signs." Both can point to this recording.

> Hi, I'm Robin. I draw signs and maps for museums. A question I like to ask on a first visit is where people stop and look back over their shoulder. Sometimes a sign belongs right there. If you're sorting out a confusing corner in your building, my email is below. I'd like to hear which corner gives you trouble.

Use the name and contact method you want somebody to pass along. Avoid "as you heard this morning" and a greeting addressed to the organizer. Someone may photograph the slide and send it to a coworker who missed the talk. Before you [record the greeting](https://hi.video/app), write down what that coworker needs to know about you. The [video business card guide](https://hi.video/blog/video-business-card-personal-intro-link) has another example.

## Make the code from the published link

Copy the share link after publishing the hi. Paste it into a private browser window, open the page and play the first few seconds. You should land on the recipient page while signed out. An address from the recorder or your dashboard can look convincing on paper and take someone to a sign-in screen.

Open a QR code generator outside hi.video. Choose a static code for a web address, paste the entire link, and save the image. If you already use the command line, the qrencode utility is one option. With it installed, substitute your link for the quoted placeholder in this command. [qrencode project](https://fukuchi.org/works/qrencode/)

`qrencode -o hello.png -s 12 -m 4 'PASTE_YOUR_FULL_SHARE_URL_HERE'`

Place the image without stretching it. Leave an empty border on all four sides, at least four little code squares wide. A colored background, a photo bleeding into the square, or a crop that shaves off the white edge can steal that space. Keep the code dark against a light background. [QR code margin guidance from DENSO WAVE](https://www.qrcode.com/en/howto/code.html)

## Give the address its own line

A readable card layout could look like this fictional example. Replace the sample address with one you own that opens the introduction. If you use a short path on your own site, set up that path before sending the artwork to print.

> Robin Vale | Museum maps and signs  
> A quick hello from Robin  
> robin.example/hello  
> [QR code]

For a working specimen, [download the printable QR card](https://hi.video/assets/editorial-20261121/printed-video-link-example.pdf). The printed address and the code both lead to the public video business card guide. A QR reader decoded the rendered PDF to that guide's exact address. Print this sample to try the layout, then run the same checks on the card with your own introduction.

On the slide, give the address the same prominence as something you expect the audience to copy. It does a second job when people are already watching the talk on the phone they would have used to scan. Put a clickable version in a deck you plan to distribute. Speak the short address aloud while the slide is up, then leave it there for questions.

## Test the card and slide separately

Print one proof at its intended size. Lay it on a table, open the camera on a phone and scan without pinching to zoom. Tap the result. Read the recipient note and try the reply button. Now type the printed address into a fresh window. Both routes should reach the same introduction. Ask someone with a second phone to try the paper copy under the lighting where you'll hand it out.

For the slide, load the final exported deck onto the presentation computer and put it in presentation mode. Walk to the farthest seat, hold up a phone and try the scan again. If the phone hunts for the image, enlarge the code and recover the space by cutting the surrounding copy. If the code scans but the page stalls, check the room's connection and keep the address visible for later.

Save a copy of the final artwork alongside the destination address. When you change the greeting or your contact details, pull out an old card and follow it yourself. The card someone kept is the one that has to work.

## Questions people ask

**What URL should I put inside the QR code?**

Use the complete public-facing recipient link you copied after publishing. Open it in a signed-out browser to check where a stranger will land.

**Can I use the same recording for a business card and a slide?**

Yes, if the recording and page make sense in both places. Keep references to the session or event in the surrounding slide copy.

**How large should the code be on a slide?**

Start with enough space to see the code from the last row, then project the actual slide and scan it from that seat.

Related: https://hi.video/blog/video-business-card-personal-intro-link, https://hi.video/blog/reuse-one-video-introduction-for-multiple-recipients
